Life Plus Oxygen concentrators LPM-203 is one of the most
efficient, quietest, lightweight , high purity of 5 liter oxygen
concentrator in the market today. It is designed with all the best
quality Medical grade components.typically use pressure swing
adsorption (PSA) technology and are used very widely for oxygen
provision in healthcare applications, especially where liquid or
pressurized oxygen is too dangerous or inconvenient, such as in
homes or in portable clinics.
Life Plus Oxygen concentrators LPM-203 are also used to provide an
economical source of oxygen in industrial processes, where they are
also known as oxygen gas generators or oxygen generation plants.
Oxygen concentrators utilize a molecular sieve to adsorb gases and
operate on the principle of rapid pressure swing adsorption of
atmospheric nitrogen onto zeolite minerals and then venting the
nitrogen. This type of adsorption system is therefore functionally
a nitrogen scrubber leaving the other atmospheric gases to pass
through. This leaves oxygen as the primary gas remaining. PSA
technology is a reliable and economical technique for small to
mid-scale oxygen generation, with cryogenic separation more
suitable at higher volumes and external delivery generally more
suitable for small volumes.
At high pressure, the porous zeolite adsorbs large quantities of
nitrogen, due to its large surface area and chemical character.
After the oxygen and other free components are collected the
pressure drops which allows nitrogen to desorb.
Life Plus Oxygen concentrators LPM-203 has an air compressor, two
cylinders filled with zeolite pellets, a pressure equalizing
reservoir, and some valves and tubes. In the first half-cycle the
first cylinder receives air from the compressor, which lasts about
3 seconds. During that time the pressure in the first cylinder
rises from atmospheric to about 1.5 times normal atmospheric
pressure (typically 20 psi/138 kPa gauge, or 2.36 atmospheres
absolute) and the zeolite becomes saturated with nitrogen. As the
first cylinder reaches near pure oxygen (there are small amounts of
argon, CO2, water vapour, radon and other minor atmospheric components) in
the first half-cycle, a valve opens and the oxygen enriched gas
flows to the pressure equalizing reservoir, which connects to the
patient’s oxygen hose. At the end of the first half of the cycle,
there is another valve position change so that the air from the
compressor is directed to the 2nd cylinder. Pressure in the first
cylinder drops as the enriched oxygen moves into the reservoir,
allowing the nitrogen to be desorbed back into gas. Part way
through the second half of the cycle there is another valve
position change to vent the gas in the first cylinder back into the
ambient atmosphere, keeping the concentration of oxygen in the
pressure equalizing reservoir from falling below about 90%. The
pressure in the hose delivering oxygen from the equalizing
reservoir is kept steady by a pressure reducing valve.
Low cost of oxygen production
No other raw material needed except Air.
High purity of oxygen
Adjustable flow meter. 0-5LPM
Secure and reliable operation
Low Power Consumption
Low noise operation.
High / Low /Normal Pressure Alarm & Indicator
Handle for Easy Carrying.